Clarification on Anchor Type and Mechanism

This anchor is a variation of a drop-in anchor, designed for a very specific purpose.

• Anchor Type: It is an internally-threaded expansion anchor that has been pre-assembled with a bent wire form, creating a loop or “eye” for the easy attachment of tie wires.
• Mechanism: The anchor functions by expanding within a pre-drilled hole in a solid material like concrete. The anchor body is a cylindrical sleeve with four slits at its base and an internal conical plug. After the anchor is placed in the hole, a dedicated setting tool (a steel punch) is inserted into the anchor. When the setting tool is struck with a hammer, it drives the internal plug down into the anchor’s base. This forces the slitted sections of the sleeve to expand outwards, creating a powerful friction-hold against the walls of the concrete hole. This provides a permanent and reliable anchor point.

Product Installation Instructions

The installation process is designed to be fast and efficient, especially for repetitive overhead work.

1. Percer le trou : Using a hammer drill and a carbide-tipped bit that matches the specified diameter of the anchor, drill a hole into the concrete ceiling or wall to the required depth.
2. Nettoyer le trou : Thoroughly clean the hole of all dust and debris using a wire brush and compressed air or a blower. A clean hole is critical for achieving the anchor’s maximum holding capacity.
3. Insérer l'ancrage : Place the Tie Wire Anchor into the clean hole. The top of the anchor should be flush with or slightly below the concrete surface.
4. Set the Anchor: Insert the proper setting tool into the anchor until it makes contact with the internal expansion plug. Strike the end of the setting tool firmly with a hammer until the anchor is fully expanded. The shoulder of the setting tool will make contact with the top of the anchor, indicating it is properly set.
5. Attach Wires: The anchor is now securely set and ready for tie wires, cables, or chains to be threaded through the integrated wire loop.

Paramètres du produit

Caractéristiques principales

• Specialized for Suspension: The integrated wire loop is specifically designed for the quick and secure attachment of tie wires, making it ideal for suspended ceiling applications.
• Secure Hold in Concrete: The expansion mechanism provides a strong and permanent anchor point in solid concrete, suitable for overhead loads.
• Flush Installation: The anchor sits flush with the concrete surface, providing a neat and unobtrusive fixing point.
• Easy and Fast Installation: The simple “drill, insert, set” process is efficient for large-scale projects with many anchor points.
• Corrosion Resistance: The white zinc plating offers good protection against rust in typical indoor construction environments.

Common Applications

The Tie Wire Anchor is essential for a variety of overhead suspension tasks in commercial and industrial construction:

• Suspended Ceilings: The primary application is for hanging the grid system (T-bars) for acoustical tile ceilings.
• Lighting Fixtures: Suspending industrial or commercial light fixtures.
• HVAC Ductwork: Providing support points for hanging lightweight ductwork.
• Cable Management: Securing overhead cable trays, conduit, and electrical wiring.
• Signage: Hanging lightweight signs and banners from concrete ceilings.